Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice A/D User Guide Things you need to know October 2019 55 Product Version 17.4-2019 © 2022 All Rights Reserved. PSpiceDiagnostic_ALL_Itera tion_Data.csv This CSV format report is generated if DEBUG value is set to either 2 or 3. The report lists time; accepted/rejected time step; and the name old value, and value of worst signals for each count. PSpiceDiagnostic_Accepted_ Data_TimeStep.csv This CSV format report is generated if DEBUG value is set to 3. The report lists time; accepted delta; total count of rejected steps; LTE rejected steps; device rejected steps; device causing LTE error; limiting signal name; limiting signal values over t, t-1, and t-2; and last step back time, delta, and reason. PSpiceDiagnostic_ALL_Data_ TimeStep.csv This CSV format report is generated if DEBUG value is set to 3. This report lists all time steps with information about time; accepted delta; accepted/rejected time step; limiting signal name; limiting signal values over t, t-1, and t-2; step back reason; and limiting source name. PSpiceDiagnostic_Simulatio n_Settings.csv This CSV format report is generated if DEBUG value is set to 3. This report lists all the simulation parameters in the following categories along with value: ❑ Transient Analysis ❑ Tolerance ❑ Iteration Limits ❑ Convergence ❑ Semiconductors ❑ Output ❑ Bias Point ❑ Digital ❑ Matrix ❑ Miscellaneous