Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice A/D User Guide AC analyses October 2019 516 Product Version 17.4-2019 © 2022 All Rights Reserved. 6. Enter the noise analysis parameters as follows: 7. Click OK to save the simulation profile. Table 10-7 In this text box... Type this... Output Voltage A voltage output variable of the form V(node, [node]) where you want the total output noise calculated. To find out more about valid syntax, see Output variables on page 430. I/V Source The name of an independent current or voltage source where you want the equivalent input noise calculated. Note: If the source is in a lower level of a hierarchical schematic, separate the names of the hierarchical devices with periods (.). Example: U1.V2 Interval An integer n designating that at every n th frequency, you want to see a table printed in the PSpice output file (.OUT) showing the individual contributions of all of the circuit's noise generators to the total noise. Note: In the Probe window, you can view the device noise contributions at every frequency specified in the AC sweep. The Interval parameter has no effect on what PSpice A/D writes to the Probe data file.