Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Creating and editing models October 2019 240 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. parameters construct, PARAMS:, and the .FUNC and local .PARAM commands. 4. From the File menu, select Create Capture Parts. 5. In the Enter Input Model Library text box, browse and open the DESIGN_NAME-SCHEMATIC_NAME.LIB file. Note: The Enter Output Part Library is automatically filled in with the DESIGN_NAME-SCHEMATIC_NAME.OLB file. 6. Click OK and OK again to clear the .ERR log window. The subcircuit part is now ready for use in a design. To configure the subcircuit file 1. In the schematic page editor, from the PSpice menu, choose Edit Profile to display the Simulation Settings dialog box. 2. Click the Configuration Files tab. 3. Click either Library or Include in the Category field of the Configuration Files tab, and then configure DESIGN_NAME-SCHEMATIC_NAME.LIB as either a model library or an include file (see Configuring model libraries on page 244). Changing the model reference to an existing model definition Parts are linked to models by the model name assigned to the parts' Implementation property. You can change this assignment by replacing the Implementation property value with the name of a different model that already exists in the library. You can do this for: ■ A part instance in your design. ■ A part in the part library. To change model references for part instances on your design 1. Find the name of the model that you want to use.