Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Creating and editing models October 2019 219 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Example: Creating a PSpice model based on device characteristic curves In this example, you will model a simple diode device as follows: ■ Create the schematic for a simple half-wave rectifier. ■ Create a new model for a diode. ■ Attach new model to the D1 diode. Creating the half-wave rectifier design To create the design in Capture 1. From the Project Manager, from the File menu point to New, then choose Project. 2. In the New Project dialog box, ensure that the Analog or Mixed A/D option is selected. 3. Enter the name of the new project (RECTFR) and click Create. 4. From the Capture Place menu, choose Part. Figure 4-4 Design for a half-wave rectifier.