Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Preparing a design for simulation October 2019 169 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. RELTOL Relative tolerance of Voltage and current The value of this variable is as specified in the Options tab of the Simulation Settings dialog box. ABSTOL Current tolerance Describes the best accuracy of currents in a simulation run. The value of this variable is specified in the Options tab of the Simulation Settings dialog box. VNTOL Voltage tolerance Describes the best accuracy of voltages in a simulation run.The value of this variable is specified in the Options tab of the Simulation Settings dialog box. CHGTOL Charge tolerance Describes the best accuracy of charges. The value of this variable is specified in the Options tab of the Simulation Settings dialog box. GMIN Indicates the minimum conductance used for any branch. The value of this variable is specified in the Options tab of the Simulation Settings dialog box. Table 3-6 Constants in arithmetic expressions, Constant.. Value PI 3.14159265 Table 3-5 System variables, continued This variable... Evaluates to this...