Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice A/D User Guide Simulation examples October 2019 127 Product Version 17.4-2019 © 2022 All Rights Reserved. This creates a new property for the PARAM part, as shown by the new row labeled RVAL in the Attributes dialog box. 8. In the Value text box, enter 1k as the initial value of the parametric sweep. 9. Click OK to close the Attributes dialog box. 10. Save the design. 11. Switch to PSpice A/D. 12. Click the trace name Vp(out) and press Delete to remove the trace. Note: This example is only interested in the magnitude of the response. To set up and run a parametric analysis to step the value of R1 using Rval 1. From the design entry tool's PSpice menu, choose New Simulation Profile. The New Simulation dialog box appears. 2. In the Name text box, type Parametric. 3. From the Inherit From list, select AC_Sweep, then click Create. The Simulation Settings dialog box appears. The root schematic listed is the schematic page associated with the simulation profile you are creating. 4. Click the Analysis tab.