Issue link: https://resources.pcb.cadence.com/i/1180190
Migration Guide for Allegro Platform Products Allegro Platform Package Products October 2019 115 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. Note: For detailed information on ARCs, see the The Assembly Constraint Datasheets chapter of Allegro Platform Constraints Reference. Design – Cavity Acute Angle Cavity Check ADRC_ACUTE_ANGLE_CAVITY Bond Finger to Cavity Spacing ADRC_FINGER_TO_CAVITY_SPC Die to Cavity Edge Spacing ADRC_COMPONENT_TO_CAVITY_SPC Minimum Cavity Size ADRC_MIN_SIZE_CAVITY Design – Shape Acute Angle Shape Check ADRC_MINIMUM_SHAPE_SPC Wire – Solder Mask Spacing Solder Mask to Via Drill Filled ADRC_SM_TO_FILLED_DRILL_SPC Solder Mask to Via Drill Unfilled ADRC_SM_TO_UNFILLED_DRILL_SPC Wire – Wire Spacing Wire Substrate End Gap Inside Solder Mask On Finger to SM Edge ADRC_WR_END_TO_MASK_SPC_FNGR On Metal Along Wire to SM Edge ADRC_TACK_PT_ALONG_S_MASK_GAP On Shape to SM Edge ADRC_WR_END_TO_S_MASK_SPC_SHAPE Wire Tack Point Minimum Gap To Bond Finger Edge ADRC_TACK_PT_TO_FINGER_EDGE_GAP Connected Metal Along the Vector of Wire ADRC_TACK_PT_ALONG_METAL_GAP Connected Shape Edge ADRC_TACK_PT_TO_SHAPE_GAP Die Pin Edge ADRC_TACK_PT_TO_DIEPIN_EDGE_GAP Wire Tack Point to Cavity Edge Spacing ADRC_TACK_PT_TO_CAVITY_SPC Wire to Cavity Edge Spacing ADRC_WIRE_TO_CAVITY_SPC