All About NB-IoT
Learn what NB-IoT protocol is
Standard and system specifications for NB-IoT networks
A discussion of NB-IoT applications and use cases
NB-IoT enables new device connectivity options that cover an incredibly large area
Until recently, many cellular networks supported less than 10% of all IoT connections. This was due to the fact that many cellular-connected IoT devices are best suited for cellular connections with lower bandwidth, enabling efficient connectivity that supports a long battery life.
Pre-existing wireless networks, such as 4G, offer significantly more power than these IoT use cases require. Furthermore, IoT applications require seamless coverage in remote environments where an unoptimized connection can drain the battery life and shorten the device’s lifespan.
This is where NB-IoT comes in–a fast-growing cellular technology with low power, high efficiency, and cost-effective connectivity. NB-IoT is able to increase the capacity to support a massive number of new connections with only a portion of the available spectrum.
What Is Narrowband Internet-of-Things (NB-IoT)?
Narrowband Internet-of-Things (NB-IoT) is a wireless communication standard for IoT devices. It is part of the low-power wide area network (LPWAN), which connects devices that need relatively lower amounts of data and bandwidth and have a longer battery life (sometimes over 10 years), making it perfect for a variety of IoT devices.
NB-IoT applications generally require smaller amounts of data that are infrequently transmitted. NB-IoT was initially developed by 3GPP in 2016, an international standards body responsible for mobile telecommunication standards including 4G, LTE, 5G, and 5G NR. Many mobile operators now deploy network capabilities enabling NB-IoT.
Nb-IoT focuses on indoor coverage and areas with high connection densities. Specifically, connections are able to penetrate underground into enclosed spaces while continuing to provide 20+ dB of coverage. NB-IoT operates on a subset of the LTE standard bandwidth while being limited to a single narrow band of 200 kHz.
NB-IoT Standards and System Specifications
NB-IoT is also referred to as LTE Cat-NB and operates under the category of the LPWA network standard and protocols, along with a handful of other wireless IoT communication standards.
It is specifically designed to address the Low Power Wide Area Network (LPWAN) requirement of IoT and co-exist with pre-existing 2G, 3G, and 4G mobile networks. NB-IoT also benefits from the security and privacy features of mobile networks, including user identity confidentiality, data integrity, mobile equipment identification, and entity authentication.
NB-IoT uses half-duplex communication, which means that either the module is transmitting or the cellular base station is transmitting (never both). Utilizing half-duplex communication with lower data speeds and a single antenna reduces the cost and complexity of NB-IoT devices. Some NB-IoT modules cost half of regular LTE Cat-1 cellular modules.
NB-IoT has features like Power Savings Mode (PSM) and eDRX (Extended Discontinuous Reception), reducing the power consumed by battery-powered modules. NB-IoT connections are also able to optimize the energy used for small transmissions, allowing IoT application designers to build devices that last up to a decade.
Through narrowband transmission, signal optimization, adaptive modulation, and hybrid automatic repeat request (HARQ), more than one million NB-IoT devices per square mile can connect to a network. This makes NB-IoT an incredibly appealing option for IoT devices requiring networks with more capacity. A single NB-IoT network cell can connect up to 50,000 devices, all while minimizing power consumption and increasing coverage range in areas generally not served by traditional cellular technologies.
NB-IoT utilizes large signal repetition, enabling better coverage at the cost of a lower data rate. Additionally, it offers much larger area coverage than other cellular technologies, ensuring that even the most out-of-reach locations are covered.
NB-IoT is best targeted at devices requiring simple, low-data bandwidth communication, such as agriculture and industrial solutions.
NB-IoT Use Cases
The communication protocol is designed to support IoT devices that do not require high speeds but are inexpensive, run for a decade or more on battery power, connect to cellular networks even with hundreds of other devices nearby, and operate in remote locations, underground, and within buildings.
NB-IoT is most suited to simple, static, low-data, and low-energy use cases. IoT devices that utilize NB-IoT include smart parking, utilities, wearables, and other industrial solutions. Other examples include agricultural monitoring applications and fuel, water, pipeline, and tank management systems. Other low-powered IoT examples perfect for operation on the NB-IoT protocol include parking, street lighting, waste management, smart city uses, and building automation applications.
Leading electronics providers rely on Cadence products to optimize power, space, and energy needs for a wide variety of market applications. To learn more about our innovative solutions, talk to our team of experts or subscribe to our YouTube channel.