Issue link: https://resources.pcb.cadence.com/i/1532922
20. Now you have a net group (named NG2(8)) where you can apply any constraint set you want. Apply the DDR3 constraint set by clicking on the Referenced Electrical CSet cell for the NG2(8) group (see below). Now that you know how to create constraint sets and apply them to your nets, we will only show the constraint sets that can be created. We'll show how to apply the constraints to your nets in the Physical and Spacing and Same Net Spacing sections of the OrCAD X Capture Constraint Manager tool. We'll also show the Properties section of the Constraint Manager tool. After that, we will look at the Constraint Manager on the PCB Editor side in OrCAD X. Physical Constraints Here is an example of the physical constraint sets created within Constraint Manager. Physical Constraint Set 20 www.cadence.com OrCAD X Constraint Management Guide