Issue link: https://resources.pcb.cadence.com/i/1532922
PCB Stack up In OrCAD X Presto PCB Editor, note the PCB stack up for this board. To do that: 1. Go to the menu at the top, then select Tools – Cross Section. 2. Click Ok to close the stack up. In the next section we will cover the main constraints you will want to apply for any simple to complex printed circuit board. In this case for our project, we are applying simple constraints to this complex board first, then the advanced constraints. Opening The Constraint Manager (PCB Side) The following constraints can be applied to standard PCBs (please refer to the previous sections of this document to learn how to implement these constraints). Open Constraint Manager in OrCAD X Presto PCB Editor by clicking on the main menu and choosing Tools – Constraint Manager. 27 www.cadence.com OrCAD X Constraint Management Guide