Issue link: https://resources.pcb.cadence.com/i/1532922
Design for Assembly Constraints Outline Components need to have sufficient spacing from the outline of the board. Then, if need be, as shown above, you can always click on the far right to create a new custom Constraint Set (New CSET) to add to the list of assembly constraints. Package to Package Spacing The IPC-2221 standard requires that components have a minimum spacing from the edge of a component to another compo- nent's edge or side, and the side of a component to another component's edge or side. This creates a matrix of spacing that can get complex rather quickly. 69 www.cadence.com OrCAD X Constraint Management Guide