Issue link: https://resources.pcb.cadence.com/i/1532922
Impedance Workflow Our first analysis will be the Impedance Workflow. To run the impedance workflow do the following: 1. Choose Impedance Workflow. 2. Under Analysis Modes, select Net Based. 3. Below that, choose Select Nets. 4. Select all the nets on the left (you can click one of the nets, then type Ctrl + A on your keyboard). 5. With all the nets highlighted, click the >> arrow to move all the nets to the right. This means we will analyze all the nets. TIP: In most cases this is not necessary, and we can just add critical nets. The reason to choose fewer nets would be to help the software run more quickly, since simulation can be intensive for larger designs. 6. Click Apply, then OK. The Select Nets section will then have a check mark next to it. 94 www.cadence.com OrCAD X Constraint Management Guide