Issue link: https://resources.pcb.cadence.com/i/1532922
Final Constraint Design Rule Check Let's perform a design rule check (DRC) to see if constraints created are being adhered to. Close the Constraint Manager if it is open. Then as shown below, in OrCAD X Presto PCB Editor, navigate to the menu and select View – Panels – Properties. The Properties Panel will appear. Click on a blank area of the design canvas. You can pin the panel to keep it active by clicking the thumbtack icon in the upper right corner of the panel. Then to update the design rule check results, click the Out of Date icon. That will update the DRC analysis. When finished, Presto will display the updated Pie Chart (see image below). 90 www.cadence.com OrCAD X Constraint Management Guide