Issue link: https://resources.pcb.cadence.com/i/1532922
TIP: You can change the impedance view from single ended traces to differential pair traces by clicking under the Analysis Results section and selecting the dropdown where it says Single Ended. Change it to Diff Pair. Now the impedance trace view changes accordingly to show your differential pairs and their impedances from the color scale (see below). Now you can adjust your routing and quickly simulate your design until your impedances are within acceptable limits for your design. There are more options to explore, but the most important is saving your results. To do that, click Save Analysis Results, then give the file a name and save it (see below). 96 www.cadence.com OrCAD X Constraint Management Guide