Issue link: https://resources.pcb.cadence.com/i/1532922
7. Click the "Set up ERC Options" text. In the new window, check Detect and model the coplanar traces if you want to include that. You can also activate the options across all tabs, but for now we will go with current settings (with Detect and model the coplanar traces enabled). 8. Click Apply then Ok. 9. Then choose Start Analysis. 10. The analysis begins and the progress bar will increase to 100% when it is finished. It can take a few minutes, depending on the number of nets analyzed and the complexity of the PCB. Also, consider the different options you want for analysis. Don't include more options than necessary. But if you select all options, that is fine, too. 11. When the simulation is complete, navigate to the lower left section of the Analysis Workflows Panel to select Impedance View. 12. Once selected, the board changes to shadow mode to highlight the nets on the board and all their impedances using a color scale. 95 www.cadence.com OrCAD X Constraint Management Guide