Issue link: https://resources.pcb.cadence.com/i/1532922
Now any objects within the BGA regions on the board will have their own specific spacing and physical rules. The Constraint Manager will adjust trace widths, spacing, etc. automatically while you are routing. Advanced Same Net Spacing Constraints In most cases you can leave Same Net Spacing Constraints alone. There are special cases where you might need to delve in here, though. In particular when you have shorts between planes and traces, or your thermal reliefs are giving you issues. We will leave these constraints as is. Advanced Manufacturing Constraints Manufacturing Constraints have been applied in the following categories and as shown in the images below. Design for Fabrication Constraints Fabrication constraints have to do strictly with the printed circuit board features, not component arrangement. We address the constraints we set up in our design accordingly. Outline 64 www.cadence.com OrCAD X Constraint Management Guide