Issue link: https://resources.pcb.cadence.com/i/1180070
Allegro Constraint Compiler: Workshop Learn more at Cadence Support Portal - https://support.cadence.com © 2019 Cadence Design Systems, Inc. All rights reserved w orldw ide. Page 10 ACC Starter Templates Microsoft Excel spreadsheet (.xlsx) template files are provided as part of the installation to assist in table creation. These tables should be copied over to a new name and modified in its current format, but must be saved to file type CSV (Comma delimited) (.csv) using File > Save As to be read by the compiler. The "Starter Table" worksheet tab contains the default column headers as well as a description of each at the bottom of the worksheet. This table information should be entered in the worksheet tab. Each template file has the "Data Row Examples" worksheet tab which contains sample templates with specific examples based on the type of template file. Rule template files have additional worksheet tabs which provide the different Constraint Header names for each of the domains (Physical Constraints, Spacing Constraints, and Electrical Constraints). The location of the template in the installation folder is under install>\share\pcb\examples\acc\Starter_Templates. Mapping Name Table o mapping_starter.xlsx Object Table o object_grouping_starter.xlsx Rule Specification Table (Rule Sets) o rule_spec_starter.xlsx (All domains) o rule_spec_Phy_starter.xlsx (Physical domain) o rule_spec_Spc_starter.xlsx (Spacing domain) o rule_spec_Elec_WireViaEtch_starter.xlsx (Electrical domain) • Wiring, Vias, and Total Etch Length Worksheets