Electronic Interconnects: Maintain Connectivity in a Multi-Board PCB System

October 19, 2018 Cadence PCB Solutions

CPU Chip


One may think of interconnectedness as more occurring in nature than in technology, however, humans are remarkably adept at mimicking naturally occurring ideas in their inventions. Electronic interconnects are one such mirroring. Take mushrooms for an example of how a vast array of living things will develop interconnectedly through a similar foundational network. Electronic interconnects will strive to do a similar purpose: provide system connectivity without distorting individual circuit autonomy. 

Today’s electronics often incorporate multiple interconnected printed circuit boards (PCB) into their designs. Getting all the components in a multi-board system to work together as a cohesive final product hinges on choosing the right connectors for the design. 

In this post, we’ll dive into the different types of PCB interconnects and some best practices for implementing them in your next multi-board PCB project.

Electronic Interconnects in the Rising Age of System Design

When considering a multi-board system, most often you’ll find yourself working through two or three main difficulties faced with electronic interconnects. These factors tend to be in frequency and switching speed limitations, current capacity, and operating temperature. 

Signal integrity and thermal conductivity considerations are both paramount for any PCB system design, and working through the potential resilience of a chosen connector will involve smart planning and clear documentation. 

Types of Multi-Board PCB Interconnects

Whether you plan to create vertical towers of PCBs stacked on top of each other, or need to load multiple boards into racks to fit into a server, designers have many options when it comes to the types of connectors that are available.

Standard Board Interconnects: Male/female, pin/socket headers are the most common type of board-to-board connector out there. Available at a low cost, these interconnects are popular for breadboarding and Arduino kits.

Backplane Connectors: A typical backplane is a PCB with no active components. Its primary purpose is twofold: provide structural integrity to the multi-board system and serve as a surface for multiple daughter boards to connect to.

Card edge connector: Often used as expansion slots on motherboards, backplanes or riser cards, edge connectors are designed to mate with the conductive traces lining the edge of another board (e.g. PCI-e slots).

Wire-to-board: Need to connect cables or wires to a board? FFCs (flexible film cables), FPCs (flexible printed cables), high-speed internal cabled interconnects, and ribbon connectors are just a handful of the options out there.

Direct-soldered: Looking to attach a small wireless module to a larger board? Castellated vias are a popular method for creating PCB modules that can easily be soldered to other boards. Be sure to follow soldering standards such as the IPC-A-610 or J-STD-001.


EI gears working together in a machine

I wish Electronic interconnects were as easy as just gluing a few circuits together.


Multi-Board PCB Interconnect Design Considerations

Now that we’ve covered the different types of PCB interconnects out there, let’s take a look at some general design tips to consider when implementing your multi-board PCB design.



The same crosstalk, impedance, and other EMI (electromagnetic interference) factors you consider for single boards must be extended to multi-board systems. Before you start stacking those boards into PCB towers, here are some things to consider:

Beware of the common mode. When two legs of a differential pair are different lengths, the difference can create a longitudinal signal in the common mode, turning the system into an efficient antenna.

Avoid accidental antennas. Where antennas are unavoidable, keep your signal and return currents closely coupled to reduce emissions. In fact keep all signal layers across the stack closely coupled to an uninterrupted reference plane.  

Keep your signals separate. Analog (DC) and digital (AC), high speed and low speed circuits should always be kept separate, and the same is true across the multi-board stack. Be aware of which traces are routed through your boards.

Remember that the interconnects and vias connecting your boards together change the overall signal of your system. You can read more tips for reducing EMI in your PCB designs here.



Corrosion poses a direct risk to connectivity. Copper, lead, and plated tin are highly susceptible to corrosion. On the other hand gold, silver, graphite, and copper-nickel alloys are highly resistant to corrosion. Understanding the conditions that lead to corrosion can help you make informed decisions on the types of materials you should use for your connections and components:

Atmospheric: When metals are exposed to oxygen and water, oxidation can occur. Moisture in the air is all that’s needed to corrode copper contacts, reducing conductivity.

Fretting: Frequent wear and tear in moving parts, such as the wiping action in solder-plated switches, is known to cause corrosion by removing the surface oxide layer and exposing the underlying material to oxidation.

Galvanic: There’s a reason there’s a standard for dissimilar metals (MIL-STD-889). When two different metals are in the presence of an electrolyte (such as from a battery), the more resistant metal corrodes faster than the weaker metal (e.g. gold will corrode faster when in contact with tin).

Electrolytic: It’s possible for dendritic growth to occur between adjacent traces in the presence of an ionic fluid. The potential difference between the two traces pulls metal slivers away from each trace forming a bridge and leading to a short circuit.


EI gears on a wooden plank

Fortunately, you can predict most if not all pitfalls of complicated system design with proper analysis.


Most PCB designs are mainly concerned with atmospheric corrosion and fretting between mating connectors. By understanding the conditions your product may encounter, it’s easier to select materials accordingly.

The Real Mitigation for Connectivity Risks: Holistic Design

Connectivity is important, but it’s only one piece of the larger puzzle that is multi-board PCB design. It takes a holistic design approach to ensure that each board and component fits together in a 3D enclosure while avoiding the adverse side effects of EMI, thermal constraints, and corrosion.

That’s where Cadence’s suite of design and analysis tools come in with both a PCB design software with a unique 3D Workbench methodology that helps bridge the divide between the mechanical and electrical domains of PCB design and powerful simulation and analytical tools to verify your design at any stage. Ready to apply a holistic approach to your next multi-board PCB project?

If you’re looking to learn more about how Cadence has the solution for you, talk to us and our team of experts.

About the Author

Cadence PCB solutions is a complete front to back design tool to enable fast and efficient product creation. Cadence enables users accurately shorten design cycles to hand off to manufacturing through modern, IPC-2581 industry standard.

Follow on Linkedin Visit Website More Content by Cadence PCB Solutions
Previous Video
How to Reduce Power Starvation and Hot Spots
How to Reduce Power Starvation and Hot Spots

Allegro's IR Drop analysis makes it easy to analyze the current density of your PDN.

Next Video
Worst-Case Analysis in PSpice
Worst-Case Analysis in PSpice

Simulate your design using worst-case analysis in PSpice so you can identify the most critical components t...