Rapid Demo of Serial Link Model Generation using Cut and Stitch Process in 3D-EM, Part-2

November 30, -0001
Rapid demonstration of the step-by-step process of viewing SPD files of cutting zones consisting of different sections of a serial link interface, assigning 3D-EM or Hybrid solver to cutting zones, setting simulation options, generating S-parameters for cutting zones, identifying S-parameters data files of cutting zones and the complete serial link interface and viewing 3D electric and magnetic field distribution in cutting zones, using the 3D-EM tool.
Previous Video
Rapid Demo of Serial Link Model Generation using PowerSI
Rapid Demo of Serial Link Model Generation using PowerSI

Rapid demonstration of step-by-step process for generating S-parameters model of a serial link interface, u...

Next Video
Rapid Demo of Serial Link Model Generation using Cut and Stitch Process in 3D-EM, Part-1
Rapid Demo of Serial Link Model Generation using Cut and Stitch Process in 3D-EM, Part-1

Rapid demonstration of the step-by-step process of dividing the polygon geometry consisting of the serial l...

×

Achieving PCI-e Compliance: Getting It Right the First Time

First Name
Last Name
Location
State
Opt-in to future emails and I understand I can unsubscribe at any time.
I agree to the terms of use
*required
Terms of Use
Thank you!
Error - something went wrong!