Impedance Characterization of PCB Power-Ground Planes using Extraction Mode of PowerSI, Part-2

November 30, -0001
Demonstration of impedance characterization process for the short-circuited PCB-level power distribution network, considering adjacent power-ground planes as a cavity; analyzing the impedance characteristics of the shorted and the open cavity in terms of spreading loop inductances and resonant frequencies; computing loop inductance of the cavity as a function of frequency; analyzing shifting of cavity's input impedance peaks corresponding to shorting the cavity at different locations.
Previous Video
Impedance Characterization of PCB Power-Ground Planes using Extraction Mode of PowerSI, Part-3
Impedance Characterization of PCB Power-Ground Planes using Extraction Mode of PowerSI, Part-3

Demonstration of impedance characterization process for the PCB-level power distribution network, first add...

Next Video
Generating W-Element Transmission Line Model for Pre-Layout Parallel Bus in SystemSI
Generating W-Element Transmission Line Model for Pre-Layout Parallel Bus in SystemSI

Demonstrating the step-by-step process of generating W-Element transmission line model, using the built-in ...

×

Achieving PCI-e Compliance: Getting It Right the First Time

First Name
Last Name
Location
State
Opt-in to future emails and I understand I can unsubscribe at any time.
I agree to the terms of use
*required
Terms of Use
Thank you!
Error - something went wrong!