Allegro PCB Librarian - Creating a Build and Test Area
This video shows you how to create a build and test area.
Other content in this Stream
Auto-Route versus Auto-Interactive Routing--Which Is Better?
This article discusses the similarities and differences of auto-route versus auto-interactive routing and which type of routing would be best to use.
Microprocessor vs. Integrated Circuit--What’s the Difference?
When talking about a microprocessor vs. integrated circuit, there are many important distinctions and design considerations you need to know to work with them.
Linear Power Supply vs. Switching Power Supply: Advantages and Disadvantages
A linear power supply is generally not as efficient as a switch-mode power supply (SMPS), but it does afford better performance.
Vertical Conductive Structures (VeCS) for PCB HD Trace Routing
This article is about Vertical Conductive Structures (VeCS) and how they are used to benefit high-density routing in a printed circuit board design.
SerDes in FPGA: Importance to Overall FPGA Performance and Functionality
SerDes in FPGA minimizes the number of input/output pins and connections while providing data transmission over a differential or single line.
AC-DC Power Supply Guidelines for Beginners
Here is a collection of AC-DC power supply guidelines to help you incorporate this essential technology into your circuit designs.
Fault Tree Analysis Structure for Electronics Manufacturing
Fault Tree Analysis (FTA) and Failure Mode Effects Analysis (FMEA) provide different perspectives regarding risk in critical electronic systems.
The Importance of Thermal Relief in Circuit Design and PCBA Functionality
The use of thermal relief in circuit design is critical to the design process and it affects performance, functionality, and lifecycle.
Implementing Lean Manufacturing
Implementing lean manufacturing eliminates waste and increases value.
How to Design Reliable Analog ASICs
Designing analog ASICs should be performed with the same objectives of operational and structural reliability as for PCBA design, as we explain in this blog.
Why and When Is Thermal Paste Needed for PCB Assembly?
Is thermal paste needed for your board’s assembly can be determined by following the checklist we provide in this blog.
32 Bit Microcontroller: A Beginner’s Guide
32 bit microcontrollers are powerful PCB components but aren’t for every application. Check out this article for a full explanation of design considerations.
The Use of the Phase Shift Formula in AC Circuit Analysis
The phase shift formula enables calculations that are vital to AC circuit analysis. Let’s look at the importance of these phase shift calculations.
Is Laminated Object Manufacturing the Future of Rapid PCB Prototyping?
Laminated object manufacturing is a type of 3D printing and is a great way to rapidly and cheaply produce single-layer PCB prototypes.
DC vs AC Current Design
This article looks at information and design considerations for dealing with DC vs AC current design.
Hardware Description Languages: VHDL vs Verilog, and Their Functional Uses
Although Verilog is an HDL, it is more of a hardware modeling language and thus more suited for verification than VHDL.
The Microprocessor Chip: Design Guidelines, Functionality, and Characteristics
Microprocessor chip design continues to evolve to meet the demand for greater speed, higher functionality, and better performance.
Parameters for PCB Layout
This article is about what some of the different parameters for PCB layout are and why they are important for creating a productive work environment.
The PCB Test Point and Its Importance to Circuit Board Manufacturing
This article talks about what a PCB test point is, how it is used, and why it is important to the successful manufacturing of a printed circuit board.
CMOS VLSI Design and Circuit Simulation Tasks
CMOS VLSI design is a fundamental part of modern semiconductor ICs. During design, here are some of the important simulations you’ll need to perform.