Allegro Front to Back User Guide

Allegro Front-to-Back User Guide October 2019 21 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. 2 Capturing Logical Design Capturing a logical design or schematic is representing an electronic circuit as a logical design. When you create a logical design on a design software, you connect a components available in the library which represents a design. After creating a schematic, you perform design related procedures, such as simulate the design and analyze the design simulation results. Creating Project Using Allegro Tools Irrespective of the schematic tool you are working with, you start the PCB design process by creating a project. A design project includes paths to libraries, part tables, tool settings, global settings, view directory names, and other related settings for designing a PCB to required specifications. You create project in the schematic tool that is being used to capture the

• Cover
• c contents - Contents
• Preface
• About the Front-to-Back Flow
• How This Book is Organized
• Creating and Managing Libraries
• Allegro Front-end Tools Libraries
• Library Structure
• Creating and Managing Libraries
• OrCAD Libraries
• Capturing Logical Design
• Creating Project Using Allegro Tools
• System Capture
• You can also perform other page manipulation operations, such as creating a new page or deleting an existing page from the Project viewer. You can drag and move the pages up and down to change their order in the Project viewer.
• Allegro Design Entry HDL
• Creating Project Using OrCAD Capture
• Creating a Schematic
• Designing Schematic Using System Capture
• Creating Schematic Using OrCAD Capture
• Capturing Logical Designs using DE-HDL
• Capturing Logical Design Constraints
• Why Constraint Manager?
• Using Constraint Manager with Design Capture Tools
• All the constraints are stored in the Constraint Manager Database (CMDB) and saved in the dictionary and constraints file designname.dcf.
• Constraints in System Capture
• Capturing Constraints in Design Entry HDL
• Capturing Constraints in OrCAD Capture
• Creating Variants of Your Design
• Managing Variants in System Capture
• Creating Variants using Variant Editor
• Getting Logical Design Ready for Physical Layout
• Preparing a System Capture Design for Physical Layout
• Preparing a DE-HDL Design for Physical Layout
• Exporting a DE-HDL Design
• Forward Mode
• Preparing an OrCAD Capture Design for Physical Layout
• Exporting an OrCAD Capture
• Annotating the Design
• Packaging Your Design (Advanced)
• Generating a Bill of Materials
• Updating the Schematic With the Changes in the Board
• Passing Properties from the Layout to Schematic
• Designing Layout
• Physical Layout using OrCAD PCB Editor
• Creating a Board Outline
• Creating Symbols and Padstacks
• Importing Logic
• Defining Layers
• Defining Constraints
• Placement
• Routing
• Design Synchronization
• Physical Layout using OrCAD Capture
• Preparing the Schematic for Layout
• Property Flow from Capture to PCB Editor
• Generating Initial Board File
• Backannotation from PCB Editor
• Running Design Rules Check - Physical Rules
• Capturing Physical Constraints
• Using Constraint Manager with PCB Editor
• Synchronizing Schematics and Boards
• Need for Synchronization
• Design Synchronization Tasks
• Feedback Mode