Skip to main content

Branch Line Coupler

Key Takeaways

  • A branch line coupler, which divides or combines radio frequency (RF) signals into two equal parts with a specific phase relationship,  is widely used in RF and microwave circuits.

  • The most common form of a branch line coupler is a 90-degree hybrid coupler, which divides the input signal into two equal outputs with a 90-degree phase difference.

  • The effects of branch line couplers on PCB design depend on their frequency range, performance characteristics, and type.

Person holding an RF integrated circuit

Branch line couplers are widely used in RF integrated circuits, such as the one pictured above.

A branch line coupler divides or combines radio frequency (RF) signals into two equal parts with a specific phase relationship. It is used in various applications, primarily in RF and microwave circuits. A branch line coupler, also called a quadrature coupler, typically comprises four transmission lines arranged in a specific configuration. The most common form is a 90-degree hybrid coupler, which divides the input signal into two equal outputs with a 90-degree phase difference. 

A key feature of a branch line coupler is the isolation between the input and the coupled port. It is designed to provide a high isolation level, meaning minimal energy from the input port is transferred to the coupled port and vice versa. Branch line couplers can be implemented using microstrip or stripline transmission lines, making them suitable for various circuit board and RF design requirements.

Branch Line Coupler Applications

Power Dividers/Combiners 

Branch line couplers are used as power dividers, splitting an input signal into two equal signals with a specific phase relationship, or power combiners, fusing multiple input signals into a single output.

Balanced-to-Unbalanced Transformers 

They are employed to convert a single-ended signal into a balanced differential signal or vice versa.


In wireless communication systems, branch line couplers are used in duplexers to transmit and receive signals on the same antenna simultaneously.

Power Monitoring/Feedback Systems

They extract a portion of the input signal for monitoring or sampling while allowing most of the signal to pass through, which is useful in power monitoring and feedback systems.

Antenna Feeds

Branch line couplers are employed in the feed network of phased array antennas to divide the input power among multiple radiating elements.

Impedance-Matching Networks 

They are used in impedance-matching networks to match the impedance of a load to the source impedance, which is critical in maximizing power transfer in RF and microwave circuits.


Branch line couplers can be included in filter designs to create bandpass or bandstop filters by properly terminating the unused ports with appropriate loads.

Test and Measurement

They are used in test and measurement setups for signal monitoring, calibration, and power distribution within test equipment.

Military and Radar Systems/Satellites

They are employed in radar systems, phased-array antennas, and other military applications to control and manipulate RF signals. They also play a role in satellite communication systems for signal routing, distribution, and power splitting.

Branch Line Couplers and PCB Design

Since branch line couplers are common components in RF and microwave circuits, they can significantly impact PCB design. The effects of branch line couplers on PCB design depend on their frequency range, performance characteristics, and type. Branch line couplers can affect PCB design in the following ways:

  • Layer Stackup: PCBs for RF and microwave applications often use specialized layer stackups to control impedance and minimize signal losses. The branch line coupler's connection points and ground planes must be carefully integrated into the PCB's layer stackup.

  • Size and Footprint: The physical size of the branch line coupler, including the length and width of transmission lines, affects the overall PCB layout. Designers must allocate sufficient space for the coupler and ensure it fits within the available PCB real estate.

  • Solder Mask and Silkscreen: The solder mask and silkscreen layers should be designed to provide clear markings and easy assembly for the branch line coupler. Clear labeling of input and output ports and orientation markings can aid in assembly and troubleshooting.

  • Transmission Line Geometry: The characteristic impedance of the transmission lines used in the coupler is critical for its proper operation. The transmission lines' width, spacing, and thickness should match the desired impedance and be consistent throughout the PCB layout.

  • Signal Integrity: Maintaining signal integrity is crucial in RF and microwave circuits. Branch line couplers can introduce signal distortions if not designed correctly. To minimize signal distortions, PCB designers must consider factors like signal reflection, impedance matching, and line length matching.

  • Component Placement: The placement of the branch line coupler within the circuit is crucial. It should be positioned to minimize signal path lengths and reduce parasitic capacitance and inductance. The location of other components, such as RF connectors and components connected to the coupler, should also be carefully considered.

  • Grounding and Isolation: Proper grounding and isolation are essential for branch line couplers to achieve high isolation between input and output ports. PCB designers must ensure that ground planes are appropriately designed to provide adequate isolation and minimize interference.

  • Thermal Considerations: Branch line couplers may generate heat in high-power RF applications. PCB designers should consider thermal management techniques such as heat sinks or thermal vias to dissipate heat and maintain proper performance.

  • Manufacturability: The design should take into account the manufacturability of the PCB. Complex or intricate designs can increase manufacturing costs and require specialized fabrication techniques.

  • EMI/EMC Considerations: RF circuits can be sensitive to electromagnetic interference (EMI) and electromagnetic compatibility (EMC) issues. The PCB layout and enclosure design should address EMI/EMC concerns, including shielding and filtering.

To ensure optimal performance and reliability, PCB designers must carefully consider the coupler's size, transmission line geometry, grounding, signal integrity, thermal management, and manufacturability when integrating it into the PCB layout. Attention to EMI/EMC considerations is also essential to avoid interference issues in sensitive RF circuits.

Cadence Can Assist with Your Coupler Designs

Cadence’s suite of PCB design and analysis tools, including its OrCAD PCB Designer, can assist you with the design of branch line couplers and other types of couplers. Cadence offers design and analysis tools that authenticate the design of the branch line coupler in your RF and microwave systems.

Leading electronics providers rely on Cadence products to optimize power, space, and energy needs for a wide variety of market applications. To learn more about our innovative solutions, talk to our team of experts or subscribe to our YouTube channel.