13. You can now see the waveforms for both the current and voltage of your rectifier circuit.
a. Follow steps 9 – 10 above to change the trace properties of I(D1) and modify its color (yellow) and width.
Analyzing Results With Precise Measurements
14. To check the ripple voltage of the circuit after a transient simulation run, click on Toggle Cursor from the toolbar menu.
Then, select the square symbol next to the V(R1:2) trace expression at the bottom of the plot so that the cursor is active on
the correct plot window.
16 www.cadence.com
Getting Started With PSpice
