Working with IDF
Pro/Engineer Configuration Settings
October 2019 32 Product Version 17.4-2019
© 1999-2019 All Rights Reserved.
ROUTING_LAYERS TOP, BOTTOM, BOTH
ALL, TOP, BOTTOM,
BOTH, ALL, INNER
IDF 2.0
IDF 3.0
Shows which ECAD
board routing layers in
the electrical system
are included in a Pro/
ENGINEER routing
area ECAD feature.
No actual routing on
the board is supported
for transfer by the IDF
standard.
COMPONENT_GROUP_N
AME
ANY IDF 2.0
IDF 3.0
Allows you to add or
keep a name for the
place region ECAD
area feature.
ECAD_ASSOCIATED_
PART
BOARD
NOREFDES
BOARD
NOREFDES
PANEL
Reference Designator
IDF 2.0
IDF 3.0
In the ECAD system,
this is the part to
which the Pro/
ENGINEER hole
feature relates.
ECAD_NAME ANY ALL The ECAD system
name of the
component which
becomes the name of
the Pro/ENGINEER
.prt file.
ECAD_ALT_NAME ANY ALL but PCB
Editor
The ECAD system
alternative name for
the component.
ECAD_REF_DES Reference Designator Any The ECAD reference
designator for the
component.
Table A-2 Pro/ENGINEER Feature Parameters
Parameter Optional Value Valid Format Description
