Rapid Demo of Serial Link Model Generation using Cut and Stitch Process in 3D-EM, Part-2

-0001-11-30T00:00:00

Rapid demonstration of the step-by-step process of viewing SPD files of cutting zones consisting of different sections of a serial link interface, assigning 3D-EM or Hybrid solver to cutting zones, setting simulation options, generating S-parameters for cutting zones, identifying S-parameters data files of cutting zones and the complete serial link interface and viewing 3D electric and magnetic field distribution in cutting zones, using the 3D-EM tool.

Rapid Demo of Serial Link Model Generation using Cut and Stitch Process in 3D-EM, Part-2

Understanding W-Element Transmission Line Model for Pre-Layout Parallel Bus in SystemSI

Understanding Transmitter and Receiver AMI Model Parameters of Serial Link Systems in SystemSI

Understanding Simulation Analysis Parameters for Serial Link Systems in SystemSI

Understanding Simulation Analysis Parameters for DDR4 Bus Systems in SystemSI

Understanding Process of Generating Ports in PowerSI

Understanding PowerSI Generated S-parameters and Circuit Files

Understanding Model Connection Protocol in Circuit Files of Blocks in SystemSI

Understanding EYE, BER and BATHTUB Plots from DDR4 System Simulation

System Capture - Importing a Block in Read Only Mode

System Capture - Creating a Design Variant

Creating DRC Markers in the PCB Editor with SKILL

The Allegro PCB Editor SKILL Selection Mechanism

Adding Elements to the PCB Editor Database with SKILL

Printing the Location of All Components in PCB Editor

PCB Editor SKILL Database IDs

Reading Data From a Text File Using SKILL

Writing Data to a Text File Using SKILL

Exiting Functions Early with prog() and return()

Iterating Over a Block of Expressions in SKILL

Controlling Program Flow with Multiway Branching in SKILL