Impedance Characterization of PCB Power-Ground Planes using Extraction Mode of PowerSI, Part-3

November 30, -0001
Demonstration of impedance characterization process for the PCB-level power distribution network, first added with an ideal capacitor and then a real capacitor between the power-ground planes; analyzing impedance characteristics in terms of the resonant frequencies; step-by-step process of impedance characterization of a real capacitor, using PowerSI as a circuit simulator; refining a frequency range, using the Frequency Resampling function; analyzing interaction of the impedances of the real capacitor and open cavity and computing total loop inductance corresponding to parallel resonant frequency of the cavity added with the real capacitor.
Previous Video
Impedance Characterization of PCB Power-Ground Planes, using Extraction Mode of PowerSI Part-1
Impedance Characterization of PCB Power-Ground Planes, using Extraction Mode of PowerSI Part-1

Demonstration of impedance characterization process for the open-circuited PCB-level power distribution net...

Next Video
Impedance Characterization of PCB Power-Ground Planes using Extraction Mode of PowerSI, Part-2
Impedance Characterization of PCB Power-Ground Planes using Extraction Mode of PowerSI, Part-2

Demonstration of impedance characterization process for the short-circuited PCB-level power distribution ne...

×

Your Route to Design Success

First Name
Last Name
Location
State
Opt-in to future emails and I understand I can unsubscribe at any time.
I agree to the terms of use
*required
Terms of Use
Thank you!
Error - something went wrong!