Enabling CM on Existing Schematic Design with Constraint Added in PCB Layout: RAK
Learn more at Cadence Support Portal - https://support.cadence.com
© 2019 Cadence Design Systems, Inc. All rights reserved w orldw ide. Page 5
Download
RAK testcase database, scripts, and references can be found at 'Attachments' and
'Related Solutions' sections below the PDF. You can search for this PDF with the
document 'Title' on https://support.cadence.com.
Lab Set Up
The designdb1.zip design database for this RAK is attached.
Capture Set Up
Ensure that you have included the footprint information in the .ini path. Include
the following footprints directory (supplied):
Dir0= C:\Cadence\SPB_17.4\share\pcb\pcb_lib\symbols
Dir1= C:\cm_tutorial\10_4_cm_workshop_db\footprints
Allegro Set Up
The footprint and padpath information must also be included for the PCB
Editor. For this, launch Allegro and go to Setup > User Preferences. Click and
add above-mentioned paths to the "padpath" and "psmpath" variables.
Figure 1: Pad and footprint path configuration
