Issue link: https://resources.pcb.cadence.com/i/1532919
Constraint Set Category 1. Manufacturing > Design for Fabrication > Copper Spacing. 2. Create the constraint set by clicking in the New CSET column, then name it and click Ok. 3. Set values in the categories below: a. Holes > Plated mechanical hole: Set to desired value (e.g. 100 mils or 2.540 mm). b. Non plated holes > Non plated mechanical hole: Set value (e.g. 100 mils or 2.540 mm). 32 www.cadence.com OrCAD X Constraint Management Guide