Issue link: https://resources.pcb.cadence.com/i/1532919
2. Name the constraint set of interest (e.g., USB_SIGNALS) 3. The constraint set has been created (you will see it in the worksheet). 4. Next, apply the constraint set to the appropriate nets or net classes by going to the Physical - Net - All Layers worksheet (USB_SIGNALS application shown below). 5. Then click the dropdown and select the appropriate Physical CSet (USB_SIGNALS) you created (shown above in step 3). 6. Finally, if you need to, you can set specific trace widths for any net without having to apply a constraint set by typing values directly into the cells. Those values will appear blue and bold, like in the image below. 7. Set a value in the spreadsheet column named Line Width - Max value for USB0_VBUS_DET*, which will override the constraint set you just applied to the class, group, or net and turn it blue (shown above). 4 www.cadence.com OrCAD X Constraint Management Guide