Exporting Files from Altium to inspectAR
If you're an Altium Designer (version 15.1 and above) user, you can easily export IPC2581B and BOM files. This article will guide you through that process using Altium 19.1. If you're on a different version or want to learn more, you can find Altium's IPC-2581 Support Documentation here.
IPC-2581B Files
Opening up the .pcbdoc file for your project, navigate to File -> Manufacturing Outputs -> IPC-2581.
The menu option for IPC-2581 Output
You will be presented with the following window. Select IPC-2581B, Metric Units, 6 point floating precision, and no net-tile nets unless you have specific need.
IPC-2581 Configuration Window
Clicking OK, the IPC file we begin to be generated. The progress can be viewed on the bottom bar in Altium Designer. Once complete, you will find the produced .cvg file in the project directory.
IPC-2581 File in Project Directory
BOM
Exporting a BOM is very common, so you might already be doing this step. In Altium Designer, navigate to Reports->Bill of Materials as shown below
Bill of Materials Export Option
In the BOM Window presented, first validate that the information for your project is correct and complete. Under Export Options, ensure that the BOM is a CSV (.csv) document, then click Export.
Bill of Materials Window
Finally, name your file and select a location for it to be created.
Save As Window
Creating the Project
Now that you have generated the common files, you're ready to use inspectAR. Login to the webapp and select New Project. Next, name your project and select the two files you generated in the previous steps. Choose any additional options, and select Upload. After the files finish processing, you're now ready to use the application. Congratulations!
Creating the Project