Issue link: https://resources.pcb.cadence.com/i/973620
©2014 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence, the Cadence logo, and OrCAD are registered trademarks and the OrCAD logo is a trademark of Cadence Design Systems, Inc. in the United States and other countries. All other trademarks are the property of their respective owners. 2789 06/14 CY/ DM / PDF www.orcad.com OrCAD Library Builder Symbol Creation Saving time on symbol creation starts with advanced datasheet extraction. OrCAD Library Builder contains symbol generation capabilities which allow you to quickly and accurately extract datasheet specifications, format and check the data, and export this to the schematic tool. Symbol formatting and checking is efficiently managed with tools for quickly inputting column assignments, removing unwanted data, and defining partitions. You are no longer required to partition the symbol set before building the symbols. You can make assignments of pins to interface groups, and assign pins at a higher level of abstraction. You can also run reports to check accuracy and completeness before generating the symbol for OrCAD Capture. Footprint Creation For PCB footprint generation, OrCAD Library Builder provides a comprehensive set of land pattern calculators which allow you to input dimensions directly from a datasheet. The calculators will then generate the resulting pads and pin geometries according to the IPC-7351 specification. A comprehensive list of component package calculators are available, including BGA, CHIP, CHIPARRAY, DIP, LCC, LGA, PLCC, QFN, QFP, SOJ, and SOP. Using this method, you can ensure your footprints will be consistent and always match the industry-standard IPC spec. OrCAD Library Builder provides the ultimate placement control and editing of pads. You can select from D-shape, oblong, rectangular, or custom pad shapes, including rounding and chamfering specifications. Padstacks are user-configurable and can be assigned to unique locations, including specific corner pads or row and column locations. A comprehensive GUI allows you to see pad shape and placement, leads, dimen- sions, and more, so you can observe the exact effects of changing parameters. 3D Model Generation Ensuring proper fit and clearance is an important part of the design process. However, acquiring realistic 3D models to perform model-accurate fit analysis can be a significant challenge. OrCAD Library Builder solves this problem with its 3D model generator. The dynamically generated 3D models are based on the exact dimensions of your footprints, allowing for fast and accurate 3D analysis in either your ECAD or MCAD design environments. For the latest product or release information, visit us at www.orcad.com or contact your local Cadence Channel Partner. Sales, Technical Support, and Training The OrCAD product line is owned by Cadence Design Systems, Inc., and is supported by a worldwide network of Cadence ® Channel Partners (VARs). For sales, technical support, or training, contact your local channel partner. For a complete list of autho- rized channel partners, visit www.orcad.com/CCP-Listing.