5 - Outline to All
Non-Plated
Holes
The clearance between the edges of any non-
plated hole to the DESIGN_OUTLINE geometry.
(DFF_OLN_TO_NPH)
Etch, Non-etch
6 - Outline to
Cutout
The clearance between any CUTOUT geometry
edges to the DESIGN_OUTLINE geometry. (DFF_
OLN_TO_CO)
Stackup
7 - Outline to All
Non- Signal
Geometry
The clearance between etch geometry not
associated with any net to the DESIGN_OUTLINE
Geometry. (DFF_OLN_TO_NSG)
Etch, Non-etch
8 - Cutout to
Trace
The clearance between any trace edge to the
CUTOUT geometry. (DFF_OLN_CO_TO_TRACE)
Etch
9 - Cutout to
Shape
The clearance between any shape edges to the
CUTOUT geometry. (DFF_OLN_CO_TO_SHP)
Etch ,Non-
Etch
10 - Cutout to All
Pin Pads
The clearance between any pin pad edges to any
CUTOUT geometry. (DFF_OLN_CO_TO_PP)
Etch ,Non-
Etch
11 - Cutout to All
Via Pads
The clearance between any via pad edge to any
CUTOUT geometry. (DFF_OLN_CO_TO_VIAPD)
Etch, Non-
Etch
12 - Cutout to All
Non-Plated
Holes
The clearance between the edges of any non-
plated hole to the CUTOUT geometry. ( DFF_OLN_
CO_TO_NPH)
Etch, Non-
Etch
v
13 - Cutout to
Outline
The clearance between any CUTOUT geometry
edges to the DESIGN_OUTLINE geometry. ( DFF_
OLN_TO_CO)
Stackup
14 - Cutout to
Cutout
The clearance between any CUTOUT geometry
edge to any other CUTOUT edge geometry. (DFF_
OLN_CO_TO_CO)
Stackup
15 - Cutout to All
Non- Signal
Geometry
The clearance between etch geometry not
associated with any net to the CUTOUT Geometry.
(DFF_OLN_CO_TO_NSG)
Etch, Non-
Etch
6 www.cadence.com
OrCAD X DesignTrue DFM Rules Guide
