19 - All Via Pads to All
Non-Plated Holes
Minimum space between the edge of a via pad
and the edge of a non-plated hole. (DFF_CS_
VIAPD_TO_NONPLHL)
Etch
20 - All Via Pads to All
Non-Signal
Geometry
Minimum space between the edge of a via pad
and non-signal geometry (such as a corporate
logo added on an etch layer. (DFF_CS_
VIAPRIM_TO_NSG)
Etch
All Non-Plated Holes to
- 6 All Non-Plated
Holes to Trace
See: Trace to All Non-Plated Holes
- 12 All Non-Plated
Holes to Shape
See: Shape to all Non-Plated Holes
- 16 All Non-Plated
Holes to All Pin
Pads
See: All Pin Pads to All Non-Plated Hole
- 19 All Non-Plated
Holes to All Via
Pads
See: All Via Pads to All Non-Plated Holes
21 - All Non-Plated
Holes to All Non-
Plated Holes
Minimum space between the edge of a non-
plated hole and the edge of another non-plated
hole. (DFF_CS_NONPLHL_TO_NONPLHL)
Etch
22 - All Non-Plated
Holes to All Non-
Signal Geometry
Minimum space between the edge of a Shape
and non-signal geometry (such as a corporate
logo) added on an etch layer. (DFF_CS_
NONPLHL_TO_NSG)
Etch
All Non-Signal Geometry to
- 7 All Non-Signal
Geometry to Trace
See: Trace to All Non-Signal Geometry
- 13 All Non-Signal
Geometry to
Shape
See: Shape to All Non-Signal Geometry
- 17 All Non-Signal
Geometry to All
Pin Pads
See: All Pin Pads to All Non-Signal Geometry
- 20 All Non-Signal
Geometry to All
Via Pads
See: All Via Pads to All Non-Signal Geometry
- 22 All Non-Signal
Geometry to All
Non-Plated Holes
See: All Non-Plated Holes to All Non- Signal
Geometry
23 - All Non-Signal
Geometry to All
Non-Signal
Geometry
Minimum space between the edge of any non-
signal geometry (such as a logo or text) and
other non-signal geometry. ( DFF_CS_NSG_
TO_NSG)
Etch
12 www.cadence.com
OrCAD X DesignTrue DFM Rules Guide
