11 - Shape to All Via
Pads
Minimum space between the edge of a shape
and the edge of a via pad. (DFF_CS_SHP_TO_
VIAPDPRIM)
Etch
12 - Shape to all Non-
Plated Holes
Minimum space between the edge of a shape
and the edge of a non-plated hole. (DFF_CS_
SHP_TO_NONPLHL)
Etch
13 - Shape to All Non-
Signal Geometry
Minimum space between the edge of a Shape
and non-signal geometry (such as a corporate
logo added on an etch layer. (DFF_CS_SHP_
TO_NSG)
Etch
All Pin Pads to
- 4 All Pin Pads to
Trace
See: Trace to All Pin Pads
- 9 All Pin Pads to
Shape
See: Shape to All Pin Pads
14 - All Pin Pads to All
Pin Pads
Minimum space between the edge of a pin pad
and the edge of another pin pad. (DFF_CS_
PNPD_TO_VIAPD)
Etch
15 - All Pin Pads to All
Via Pads
Minimum space between the edge of a pin pad
and the edge of a via pad. (DFF_CS_PNPD_TO_
VIAPD)
Etch
16 - All Pin Pads to All
Non-Plated Holes
Minimum space between the edge of a pin pad
and the edge of another non-plated hole. (DFF_
CS_PNPD_TO_NONPLHL)
Etch
17 - All Pin Pads to All
Non-Signal
Geometry
Minimum space between the edge of a pin pad
and non-signal geometry (such as a corporate
logo added on an etch layer. (DFF_CS_PNPD_
TO_NSG)
Etch
All Via Pads to
- 5 All Via Pads to
Trace
See: Trace to All Via Pads
- 11 All Via Pads to
Shape
See: Shape to All Via Pads
- 15 All Via Pads to All
Pin Pads
See: All Pin Pads to All Via Pads
18 - All Via Pads to All
Via Pads
Minimum space between the edge of a via pad
and the edge of another via pad. (DFF_CS_
VIAPRIM_TO_VIAPRIM)
Etch
11 www.cadence.com
OrCAD X DesignTrue DFM Rules Guide
