Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Creating parts for models October 2019 289 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. ■ For models based on device characteristic curves, the PSPICETEMPLATE property is updated with the pinname information. ■ For template-based PSpice models, pspice_lnk view is generated. Setting up automatic part creation Automatic part creation from the Model Editor is optional. By default, automatic part creation is disabled. You can enable it using the procedure below. Note: Instead of using the PSpice default part set, you can use your own set of standard parts. To find out more, see Basing new parts on a custom set of parts on page 300. Tip In case you want to create a new symbol for only one model in a library that contains several models, set up the automatic part creation feature and use the File, Save command. Every time the file is saved with automatic part creation enabled, a new symbol is created for the selected model. All other symbols are left alone. To enable automatic part creation for new models 1. In the Model Editor with a library open, choose Options from the Tools menu. 2. In the Part Creation Setup frame, select Always Create Part when Saving Model if it is not already checked. Note: The Always Create Part when Saving Model option will be disabled if you start the Model Editor from a design entry tool. 3. Select the Pick symbols Manually check box, to ensure that Model Import Wizard is invoked every time you generate a part symbol for a model. Note: In this case, the Specify Library page of the wizard is not required and is therefore, not visible. The Associate/Replace symbol page will be invoked.