Issue link: https://resources.pcb.cadence.com/i/1180526
PSpice User Guide Creating and editing models October 2019 256 Product Version 17.4-2019 © 1999-2019 All Rights Reserved. When you save the model, the .LIB and .PRP files are updated. Note: When you use the Model Editor to create device characteristic curves-based PSpice models, the smoke information is not available by default. After you add the smoke information, a new file, LIB_NAME.PRP is created. Creating template-based PSpice models with smoke information The steps for creating template-based models with smoke information are exactly the same as the steps for creating template-based simulation models. If you have Advanced Analysis installed, the Smoke tab appears by default. You are not required to select Add Smoke from the Model menu. See Example: Creating template-based PSpice model on page 229 Using the Model Editor to edit smoke information Open a model with smoke information in the Model Editor. You can modify the maximum operating values for different smoke parameters in the Smoke Parameters frame. For models based on device characteristic curves, you can also change the port to node mapping in the Test Node Mapping window. Saving the model will update the .PRP file with the latest information.