Cadence PCB Best Practices

Rigid Flex

Issue link: https://resources.pcb.cadence.com/i/1180288

Contents of this Issue

Navigation

Page 24 of 44

Allegro/OrCAD Rigid Flex Design Creation Best Practices _______________________________________________________________________ Learn more at Cadence Online Support - https://support.cadence.com Page 25 © 2016 Cadence Design Systems, Inc. All rights reserved worldwide. A default zone name, such as ZONE_1, ZONE_2, and so on appear in the Name field under Zone Data. 3. Assign other attributes such as a constraint set and room. The Zo ne Create Settin gs in t he Optio n Tab The boundary is defined on the PCB Editor canvas. There are two methods to create a zone boundary: by using the Add Rectangle command or using the Add Shape command. The default process is by adding a rectangle. Adding a Rectangle 1. Right-click the canvas and choose the Add Rectangle command from the pop-up menu. 2. Use the Snap pick to right mouse button pick to select an edge if to align to a segment of the DESIGN_OUTLINE as illustrated in the following figure:

Articles in this issue

Links on this page

view archives of Cadence PCB Best Practices - Rigid Flex